View PS7160L-2A-E4-A_7150050.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
the mark shows major revised points. the revised points can be easily s earched by copying an "" in the pdf file and specifying it in the "find what:" field. data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. 8-pin dip, 600 v break down voltage normally open type 2-ch optical coupled mos fet solid state relay ocmos fet ps7160-2a , ps7160l-2a document no. pn10290ej02v0ds (2nd edition) date published july 2006 ns cp(k) printed in japan ? nepoc series ? 1996, 2006 description the ps7160-2a and ps7160l-2a are solid state relays containing gaas leds on the light emitting side (input side) and mos fets on the output side. they are suitable for analog signal control bec ause of their low offset and high linearity. the ps7160l-2a has a surf ace mount type lead. features ? 2 channel type (1 a + 1 a output) low led operating current (i f = 2 ma) designed for ac/dc switching line changer small package (8-pin dip) low offset voltage ordering number of taping product: ps7160l-2a-e3, e4: 1 000 pcs/reel pb-free product safety standards ul approved: file no. e72422 bsi approved: no. 8245/8246 csa approved: no. ca 101391 applications exchange equipment measurement equipment fa/oa equipment
data sheet pn10290ej02v0ds 2 ps7160-2a,ps7160l-2a package dimensions (in millimeters) 9.250.5 3.5 0.3 4.15 0.3 3.3 0.3 0.50.1 2.54 1.340.1 0.25 m 0 to 15 7.62 6.50.5 6.50.5 0.10 +0.10 ?0.05 0.90.25 9.600.4 9.250.5 3.5 0.3 1.340.1 0.25 m 2.54 ps7160l-2a ps7160-2a 1. led anode 2. led cathode 3. led anode 4. led cathode 5. mos fet 6. mos fet 7. mos fet 8. mos fet 12 4 3 65 87 top view 1. led anode 2. led cathode 3. led anode 4. led cathode 5. mos fet 6. mos fet 7. mos fet 8. mos fet 12 4 3 65 87 top view
data sheet pn10290ej02v0ds 3 ps7160-2a,ps7160l-2a marking example no. 1 pin mark ps7160-2a nl601 country assembled type number assembly lot 6 01 year assembled (last 1 digit) l n rank code in-house code (l: pb-free) week assembled
data sheet pn10290ej02v0ds 4 ps7160-2a,ps7160l-2a ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps7160-2a ps7160-2a-a pb-free magazine case 50 pcs standard products ps7160-2a ps7160l-2a ps7160l-2a-a (ul, bsi, csa ps7160l-2a-e3 ps7160l-2a-e3-a emboss ed tape 1 000 pcs/reel approved) ps7160l-2a-e4 PS7160L-2A-E4-A *1 for the application of the safety st andard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma/ch reverse voltage v r 5.0 v power dissipation p d 50 mw/ch peak forward current *1 i fp 1 a/ch mos fet break down voltage v l 600 v continuous load current *2 i l 90 (120) ma/ch pulse load current *2, 3 (ac/dc connection) i lp 250 (300) ma/ch power dissipation p d 375 mw/ch isolation voltage *4 bv 1 500 vr.m.s. total power dissipation p t 850 mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 40 to +100 c *1 pw = 100 s, duty cycle = 1% *2 conditions: i f 5 ma. load current ( ) value is. *3 pw = 100 ms, 1 shot *4 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output pins 1-4 shorted together , 5-8 shorted together. recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 2 10 20 ma led off voltage v f 0 0.5 v
data sheet pn10290ej02v0ds 5 ps7160-2a,ps7160l-2a electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma 1.2 1.4 v reverse current i r v r = 5 v 5.0 a mos fet off-state leakage current i loff v d = 600 v 0.03 1.0 a output capacitance c out v d = 0 v, f = 1 mhz 110 pf/ch coupled led on-state current i fon i l = 90 ma 2.0 ma on-state resistance r on1 i f = 10 ma, i l = 10 ma 42 50 r on2 i f = 10 ma, i l = 90 ma, t 10 ms 33 50 turn-on time *1, 2 t on i f = 10 ma, v o = 5 v, r l = 500 , 0.8 1.5 ms turn-off time *1, 2 t off pw 10 ms 0.06 0.2 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 isolation capacitance c i-o v = 0 v, f = 1 mhz 1.1 pf/ch *1 test circuit for switching time v l r l i f r in pulse input input monitor monitor v o t on t off 10 % 90 % 0 v o = 5 v 50 % output input *2 the turn-on time and turn-off time are specified as input-pulse width 10 ms. be aware that when the dev ice operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase.
data sheet pn10290ej02v0ds 6 ps7160-2a,ps7160l-2a typical characteristics (t a = 25c, unless otherwise specified) 100 85 75 50 25 0 ?25 20 60 80 100 40 0 ambient temperature t a (c) maximum forward current i f (ma) ambient temperature maximum forward current vs. 100 85 75 50 25 0 ?25 25 75 100 125 50 0 150 ambient temperature t a (c) maximum load current i l (ma) ambient temperature maximum load current vs. i f = 50 ma 30 ma 20 ma 10 ma 5 ma 1 ma 100 75 50 25 0 ?25 1.4 1.6 0.8 1.2 1.0 ambient temperature t a (c) forward voltage v f (v) ambient temperature forward voltage vs. f = 1 mhz 120 100 80 60 40 20 50 150 200 250 100 0 applied voltage v d (v) output capacitance c out (pf) applied voltage output capacitance vs. off-state leakage current i loff (a) applied voltage v d (v) off-state leakage current vs. applied voltage i f = 10 ma load current i l (ma) load voltage v l (v) load current vs. load voltage ?2.0 2.0 ?4.0 4.0 0 50 150 100 ?50 ?150 ?100 600 500 300 100 0 200 400 10 ?3 10 ?4 10 ?5 10 ?6 10 ?7 10 ?8 10 ?9 t a = 85 c 25 c remark the graphs indicate nominal characteristics.
data sheet pn10290ej02v0ds 7 ps7160-2a,ps7160l-2a 0.7 0.9 0.6 0.8 1.0 0 5 10 15 20 25 30 number (pcs) turn-on time t on (ms) turn-on time distribution n = 50 pcs, i f = 10 ma, v o = 5 v n = 50 pcs, i f = 10 ma, v o = 5 v 0.04 0.08 0 5 10 15 20 25 30 number (pcs) turn-off time t off (ms) turn-off time distribution 40 30 20 10 2.0 4.0 6.0 8.0 0 turn-on time t on (ms) forward current i f (ma) turn-on time vs. forward current v o = 5 v turn-off time t off (ms) forward current i f (ma) turn-off time vs. forward current 40 30 20 10 0 0.2 0.3 0.5 0.4 0.1 v o = 5 v normalized to 1.0 at t a = 25 c, i f = 10 ma, i l = 10 ma 100 75 50 25 0 ?25 0.5 1.5 2.5 3.0 1.0 0.0 2.0 ambient temperature t a (c) normalized on-state resistance r on ambient temperature normalized on-state resistance vs. n = 50 pcs, i f = 10 ma, i l = 10 ma 43 42 41 5 15 20 30 10 0 25 on-state resistance r on ( ) number (pcs) on-state resistance distribtion remark the graphs indicate nominal characteristics.
data sheet pn10290ej02v0ds 8 ps7160-2a,ps7160l-2a normalized turn-on time t on ambient temperature t a (c) normalized turn-on time vs. ambient temperature 100 0 ?25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 normalized to 1.0 at t a = 25 c, i f = 10 ma, v o = 5 v normalized turn-off time t off ambient temperature t a (c) normalized turn-off time vs. ambient temperature 100 0 ?25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 normalized to 1.0 at t a = 25 c, i f = 10 ma, v o = 5 v remark the graphs indicate nominal characteristics.
data sheet pn10290ej02v0ds 9 ps7160-2a,ps7160l-2a taping specifications (in millimeters) tape direction ps7160l-2a-e3 ps7160l-2a-e4 outline and dimensions (tape) 1.550.1 2.00.1 4.00.1 1.750.1 4.5 max. 10.40.1 12.00.1 1.5 +0.1 ?0 7.50.1 10.30.1 16.00.3 4.0 0.1 0.3 outline and dimensions (reel) packing: 1 000 pcs/reel 3302.0 1001.0 2.00.5 13.00.2 r 1.0 21.00.8 2.00.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0
data sheet pn10290ej02v0ds 10 ps7160-2a,ps7160l-2a recommended soldering conditions (1) infrared reflow soldering peak reflow temperature 260 c or below (package surface temperature) time of peak reflow temperature 10 seconds or less time of temperature higher than 220 c 60 seconds or less time to preheat temperature from 120 to 180 c 120 30 s number of reflows three flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 220c package surface temperature t (c) time (s) (heating) to 10 s to 60 s 260c max. recommended temperature profile of infrared reflow 12030 s (preheating) 180c 120c (2) wave soldering temperature 260 c or below (molten solder temperature) time 10 seconds or less preheating conditions 120 c or below (package surface temperature) number of times one flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron peak temperature (l ead part temperature) 350 c or below time (each pins) 3 seconds or less flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperatur e of the package woul d not be heated over 100 c. (4) cautions fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
data sheet pn10290ej02v0ds 11 ps7160-2a,ps7160l-2a usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high te mperature and high humidity.
data sheet pn10290ej02v0ds 12 ps7160-2a,ps7160l-2a the information in this document is current as of july, 2006. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
0604 nec compound semiconductor devices hong kong limited e-mail: contact@ncsd-hk.necel.com hong kong head office tel: +852-3107-7303 fax: +852-3107-7309 taipei branch office tel: +886-2-8712-0478 fax: +886-2-2545-3859 korea branch office tel: +82-2-558-2120 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.eu.necel.com/ tel: +49-211-6503-0 fax: +49-211-6503-1327 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 compound semiconductor devices division nec electronics corporation url: http://www.ncsd.necel.com/ for further information, please contact ps7160-2a,ps7160l-2a caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. do not burn, destroy, cut, crush, or chemically di ssolve the product. do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of PS7160L-2A-E4-A

	To Download PS7160L-2A-E4-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .